Structural Stress Monitoring and FEM Analysis of the Cutting Operationof the Main Bracket of A Semi-Submersible Platform

作者：KOU Yu-feng,YANG Jian-min,XU Sheng-wen,PENG Tao,LIU Jun,WU Zhuo-wei

摘要：For a semi-submersible platform in repair, the eight old main brackets which connect columns with pontoons need to be replaced by new ones. In order to ensure the safety of the cutting operation of the old main bracket and calculate the initial stress condition of new main bracket, the structural stress monitoring of eight key spots is carried out, and then the calibrated finite element model is established according to the field monitoring results. Before cutting the main bracket and all associated structures, eight rectangular rosettes were installed, and a tailored cutting scheme was proposed to release the initial stress, in which the main bracket and associated column and pontoon plates were partly cut. During the cutting procedure, the strains of the monitoring spots were measured, and then the structural stress of the monitored spots were obtained. The stress variation characteristics at different spots during the initial cutting operation were shown and the initial stress condition of the monitored spots was figured out. The loading and support conditions of the semi-submersible platform were calibrated based on the measured initial stress condition, which made the finite element model more credible. The stress condition with the main bracket and associated structures being entirely cut out is analyzed by the Finite Element Method (FEM), which demonstrates the cutting operation to be safe and feasible. In addition, the calibrated finite element model can be used to calculate the initial stress condition of the new main bracket, which will be very helpful for the long-term stress monitoring on the main bracket.

发文机构：State Key Laboratory of Ocean Engineering

关键词：SEMI-SUBMERSIBLEPLATFORMMAINBRACKETCUTTINGoperationfieldstressmonitoringFEManalysis

分类号： O17[理学—数学][理学—基础数学]